In the mine operation production line, the crusher is an important equipment, and its operating status has a great relationship with the final benefit. Correct use and maintenance is an important part of equipment management. Many customers do not pay attention to the cleaning of the crusher when using it. However, if it is not cleaned, it will affect the operation of the equipment and increase the maintenance cost of the equipment. Therefore, cleaning work is also an important part of crusher maintenance. Let me introduce the cleaning work of the crusher, which mainly includes five aspects:
1. Clean the crusher belt
Check whether there is oil stain on the belt and pulley, if so, wipe the belt and pulley with a clean rag in time, without leaving any stain or dust;
2. Clean the inlet and outlet of the crusher
Check the material inlet and outlet to see if there is any residual material from the last working time of the crusher. If there is any, it should be disposed of in time to ensure the cleanliness and tidiness of the outlet and inlet, otherwise it may affect the quality of the finished product ;
3. Clean the inside of the crushing chamber
Check whether there are residual materials in the crushing cavity of the crusher to prevent the load from starting. Note that the power must be disconnected before cleaning. When opening the inside of the crushing chamber, first clean up the remaining material around, and then clean up the remaining material on the hammer head; because there is a lining board in the crushing chamber, when the rotary cutter is selected, the metal material will wear off some paint on the lining board , so we also need to check whether there are impurities and paint on the inner wall of the crushing chamber; when cleaning, we need to use cleaning tools such as towels and brushes to clean up. After cleaning the materials in the equipment, wipe it with 75% ethanol, and then you can Close the crushing chamber. The cleaning of the crushing cavity should be carried out before the start-up of the equipment to reduce the load on the start-up of the equipment;
4. Clean the outside of the crusher
For the cleaning of the outside of the crusher, it is mainly the cleaning of the surface of the casing and the cleaning of the ground. The cleaning work of the sand making machine is mainly to prevent failures such as material blockage of the crusher and ensure the normal operation of the crusher;
5. Clean the lubrication system
For the cleaning of the lubrication system, the lubrication system is mainly an important system for the lubrication of the wear-resistant parts of the crusher. The cleaning of the system mainly occurs during the process of lubricating oil pollution and regular cleaning, which can prevent the deterioration of the lubricating oil. Ensure the effect of lubrication, reduce the wear of wear-resistant parts, prolong the service life of equipment, and ensure the efficiency of its production.
If you want to know more knowledge and details of mining equipment, please add WhatsApp: +8618238543716. or visit our website: https://mine-machines.com/
