As a commonly used crushing equipment, the correct use and maintenance of the crusher is an important link in the equipment management work. The operators and maintenance personnel carry out a series of maintenance work on the equipment according to the maintenance rules of the equipment, which is also the objective basis for the normal operation of the equipment itself. Require. In the actual production process, many customers do not pay attention to the cleaning work of the crusher when using it, but if it is not cleaned, it will affect the operation of the equipment and increase the maintenance cost of the equipment. Therefore, cleaning work is also an important part of crusher maintenance.
1. Clean the crusher belt
Check whether there is oil stain on the belt and pulley, if so, wipe the belt and pulley with a clean rag in time, without leaving any stain or dust;
2. Clean the inlet and outlet of the crusher
Check whether there are some materials left over from the previous operation. If the remaining materials are not cleaned up, the quality of the final product may be affected in the next operation;
3. Clean the bearings
If there are attachments on the bearing, the heat dissipation of the bearing will be affected, and the heat dissipation effect will be deteriorated, which will cause the temperature of the bearing to rise, which will affect the life and performance of the equipment. In severe cases, it will cause accidents and safety problems of the equipment. The attachments should be cleaned up in time to ensure the smooth and stable operation of the bearing;
4. Clean the inside of the crushing chamber
Check whether there are other debris in the crushing cavity of the crusher. Note that the power must be disconnected before cleaning. When opening the inside of the crushing chamber, first clean up the remaining material around, and then clean up the remaining material on the hammer head; because there is a lining board in the crushing chamber, when the rotary cutter is selected, the metal material will wear off some paint on the lining board , so we also need to check whether there are impurities and paint on the inner wall of the crushing chamber; when cleaning, we need to use cleaning tools such as towels and brushes to clean up. After cleaning the materials in the equipment, wipe it with 75% ethanol, and then you can Close the crushing chamber. The cleaning of the crushing cavity should be carried out before the equipment is started to reduce the load on the equipment when it is started.
If you want to know more knowledge and details of mining equipment, please add WhatsApp: +8618238543716. or visit our website: https://mine-machines.com/
