Cone crusher is a commonly used processing machinery for ore crushing. The cone crusher has a large crushing capacity and can be used for crushing a variety of different ores. Due to the different mineral properties of different materials, the production requirements of users are different, so the model and cavity type of the cone crusher are also different. Feeding is an important part of material crushing. If the feeding is reasonable, it can not only ensure high production, Continuous, and can increase the user’s income. So, how to feed the cone crusher reasonably?
1. Before putting in materials, the user needs to set up a sieve or other filtering device in front of the cone crusher to screen out the fine and sticky materials of the species to be crushed, which can effectively relieve the blockage of the discharge port and the excessive compression of the spring. Therefore, the problems of overloading and reduction of crushing efficiency of the cone crusher in the process of crushing ore are avoided.
2. It is recommended that the user configure an iron removal device to facilitate the removal of unbreakable foreign objects such as iron blocks, because these foreign objects will cause the support sleeve to jump, frequent iron or overload, resulting in frequent movement of the spring and premature failure of the spring.
3. The feeding method should be reasonable. The material needs to be evenly distributed in the crushing cavity of the cone crusher. The speed of the material entering the crushing cavity and the falling height will also affect the crushing efficiency, and the production efficiency can be improved in a reasonable and high-yielding way. The cone crusher requires full feeding. In this feeding mode, the productivity is high, and the product particle size is fine and uniform. If the cone crusher stops, remember not to feed any more, or use residual materials in the cone crusher cavity. It needs to be cleaned up in time.
The feeding method of the cone crusher should be reasonable. If the feeding port is adjusted too large and too much material is put in, the cone crusher will be overloaded, which will not only affect the production efficiency of the cone crusher, but may also fail to meet the user’s production requirements; if the equipment If the feeding port is adjusted too small, it is easy to cause blockage and material jam, the cone crusher is prone to failure, and the service life of the equipment will be shortened. Therefore, it is necessary to feed the cone crusher reasonably during the operation process.
If you want to know more knowledge and details of mining equipment, please add WhatsApp: +8618238543716. or visit our website: https://mine-machines.com/
