The hydraulic system on the hydraulic cone crusher is mainly used to ensure the normal operation of the equipment and can also adjust the size of the discharge port. If unbreakable materials such as iron blocks enter during feeding, the hydraulic system will push the movable cone to automatically retreat, and the discharge port will become larger to discharge the unprocessable blocks. It will automatically reset after being discharged. The hydraulic system of the hydraulic cone crusher is a relatively advanced processing technology and plays a very important role in the normal operation and service life of the equipment.
How do we normally maintain the hydraulic system of the hydraulic cone crusher correctly?
1. Make sure the inside of the cone crusher is clean. There is a lot of dust in ore processing, so pay attention to the removal of dust during use, and also prevent water from entering the hydraulic oil.
2. Replace the hydraulic oil. It should be noted that you must use a filter when adding hydraulic oil, and also ensure that the filter is clean. When refueling, be sure to follow the prescribed oil level range.
3. Ensure the cleanliness of the hydraulic system. Usually our advice to customers is to use the same type of hydraulic oil for cleaning. It is not recommended to use other oils, which may cause damage to the cone crusher.
4. Pay attention to the replacement time of hydraulic oil. It is recommended to replace it shortly after the cone crusher is shut down. This will help to drain out the oil and sediment before injecting new hydraulic oil.
The above is a brief introduction to the maintenance of the hydraulic system of the cone crusher. We still need to pay attention to the maintenance of the equipment during use, so that the cone crusher can bring you greater benefits.
