Shaking table is the main gravity concentrator. It is applicable for the separation of fine-grained, micro-grained rare metal, ferrous and non-ferrous metals, precious metal, coal and other minerals. It can carry out the ore concentration operation independently, also it can work in conjunction with jig, screw separator, centrifugal separator and other equipment.
Shaking table working
The working principle of Shaking Table is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.
| Model | Stroke (mm) | Cross Slope (°） | Feed size （mm） | Feed Density (%) | Water Consumption (t/h) | Capacity (t/h) | Power (KW) | Weight (KG) |
| 6S-4450*1855*1546 | 8-22 | 1-4 | 2-0.074 | 15-30 | 0.4-1 | 0.6-1.8 | 1.1 | 800 |
| LY-3000*1620*1360 | 6-30 | 0-10 | 2-0.074 | 10-30 | 0.3-1.5 | 0.4-1.5 | 1.1 | 550 |
| LY-2100*1050*850 | 12-28 | 0-8 | 2-0.074 | 10-30 | 0.2-1 | 0.3-0.8 | 1.1 | 350 |
| LY-1100*500*430 | 9-17 | 0-10 | 2-0.074 | 10-30 | 0.1-0.5 | 0.05-0.2 | 0.55 | 150 |
The Installing and Adjustment of Shaking Table:
1. Carry out to detect bed ministries complying with the requirements of the drawings, parts
2. Lifting bed of the gold shaker table installed in front of the connector and four connected blocks
3. Hammock should prevent the local compression deformation of the side plates and shall collision bed
4. Bed installation, each connected to the screw holes should be aligned
5. Each bond inspection is correctly installed, the empty running 1-2 hours
6. Empty running is completed
