Vertical composite crusher, also known as vertical composite crusher, is one of the commonly used equipment in crushing production line and sand making production line. PFL series vertical compound crusher is a new type of fine crushing and coarse grinding product developed by our company based on the combination of similar crushing technologies at home and abroad, combined with the company’s many years of practical experience. This product has both impact and grinding crushing mechanisms. National industry standards for products. This series of products can achieve more crushing and less grinding, and is an ideal fine crushing equipment for energy saving and consumption reduction.
Working principle of vertical compound crusher:
The crusher is designed according to the principle of increasing the input energy of materials step by step and crushing them step by step. The main parts are the cover, the rotor and the cylinder. It is composed of chassis part, feed hopper, discharge hopper, motor transmission part and other components. The rotor part of this series of large-scale crushers is composed of upper, middle and lower rotors; the cylinder part of PFL2000 type III and above is composed of four petals. The rest are made up of two halves.
After the material falls into the crushing cavity, it is first thrown towards the impact plate at high speed by the throwing plate, and then falls into the gap between the hammer head and the impact plate to be hit, squeezed, ground and other crushing forces by the hammer head. The material goes from large to small, and finally is broken into small particles, which are discharged out of the crusher.
Applicable materials for vertical compound crusher:
PFL series vertical composite crusher is used for the fine crushing of various solvent raw materials in the iron and steel metallurgy industry and the crushing of various medium-hard rock minerals in other fields such as construction, building materials, and chemical industry. It is also suitable for crushing raw materials and clinker in cement plants. It is an ideal fine crushing equipment for the technological transformation of cement plants and the construction of cement production lines. Crushed materials such as: medium-soft iron ore, sandstone, gypsum, blast furnace slag, coal gangue, lump coal, metallurgical solvent raw materials, etc.
Advantages of Vertical Compound Crusher:
1. The wearing parts have high wear resistance and are easy to adjust. The chassis is equipped with a guard plate, which can break materials with high hardness and large wear;
2. High crushing efficiency, large crushing ratio, energy saving, unique structure of throwing tray, reducing use cost;
3. It is directly connected to the crushing cavity, without partitions or grates in the middle, and the material is discharged smoothly. The crushing process is a pass-through crushing, with a large amount of material passing through and a fast passing speed, so the output is high. Relatively speaking, the energy consumption is less;
4. The equipment runs smoothly, with low noise, small vibration and good sealing. Easy to operate, small footprint, easy to install and maintain.
If you want to know more knowledge and details of mining equipment, please add WhatsApp: +8618238543716. or visit our website: https://mine-machines.com/
